Stop Loss Calculator

A stop loss for a long trade sits below the entry: stop price = entry × (1 − stop %). For a short trade it sits above: stop price = entry × (1 + stop %). The loss if the stop fills = distance to the stop × position size + fees. This calculator sets the stop by percent, a fixed price, an ATR multiple or a support or resistance level, sizes the position from the risk you choose, and shows targets at 1R, 2R and 3R, a trailing stop table and what a gap past the stop would cost.

Trade direction
Stop price–
Total loss if the stop fills–
Position size–

Inputs Example values Replace them with your own. Use a dot for decimals. Prices and money in any one currency.

1. Entry and stop

2. Position size

3. Fees, targets, trail and gap

Stop price
–
Stop distance per share / unit
–
Stop distance (% of entry)
–
Risk budget = account × risk %
–
Position size
–
Position value = size × entry
–
Loss on price = distance × size
–
Fees, entry + exit at the stop
–
Total loss if the stop fills (1R)
–
Total loss as % of account
–

Take-profit targets and break-even win rate

TargetTarget priceProfit on priceFeesNet profitNet reward : riskBreak-even win rate

R = the stop distance. A 2R target is twice the stop distance from the entry. Net figures subtract fees from the profit and add them to the loss. Break-even win rate = net loss ÷ (net profit + net loss).

Price levels

Entry, stop and target price levels

Trailing stop at a few illustrative prices

Highest price since entryTrailing stopResult per unit if hitNet result at your size

Everything runs in your browser. Nothing you type is saved or sent.

How to use the stop loss calculator

  1. Pick long or short. A long stop sits below the entry (a sell stop). A short stop sits above it (a buy stop).
  2. Enter the entry price and choose how to set the stop: a percent from entry, a fixed price, a multiple of the Average True Range (ATR), or a support or resistance level plus a small buffer.
  3. Size the position. Choose “Size from risk” and enter your account size and risk per trade. The calculator divides the risk budget by the stop distance (fees included) and rounds down to your size step. Or enter your own size to see what it risks.
  4. Add fees. A fixed commission per order and a percent fee per side. Both count twice: on entry and on exit.
  5. Read the targets and the trailing table. They show the price at 1R, 2R and 3R, the net profit after fees and the win rate needed to break even at each target.
  6. Test a gap. Enter a fill price beyond the stop to see how much more a gap would cost than planned.

Stop loss formulas

Stop price, long = entry × (1 − stop %) or entry − m × ATR or support − buffer Stop price, short = entry × (1 + stop %) or entry + m × ATR or resistance + buffer Stop distance (1R) = |entry − stop price| Fees (round trip) = 2 × commission + fee % × size × (entry + exit price) Total loss at stop = distance × size + fees at the stop Size from risk = (account × risk % − 2 × commission) ÷ (distance + fee % × (entry + stop)), rounded down to the size step Target at k R = entry ± k × distance (+ for long, − for short) Net profit at target = k × distance × size − fees at the target Break-even win rate = total loss ÷ (net profit + total loss) (no fees: 1 ÷ (1 + k)) Trailing stop, long = highest price since entry − trail; short: lowest price + trail

R is the planned loss per share or unit: the distance from entry to stop. Expressing targets in R makes trades with different prices comparable. A 2R target on a 2.50 stop is 5.00 away from the entry; on a 0.40 stop it is 0.80 away.

Four ways to set the stop

MethodLong stopShort stopWhat to watch
Percententry × (1 − p)entry × (1 + p)Simple, but ignores how much the price normally moves. A 5% stop is wide for a quiet stock and tight for a volatile coin.
Fixed priceany price below entryany price above entryYou pick the level from the chart or a plan. The calculator only checks it is on the right side.
ATR multipleentry − m × ATRentry + m × ATRScales the stop to recent volatility. ATR changes daily and depends on the period you choose, so record the value you used.
Support / resistancesupport − bufferresistance + bufferThe buffer keeps the stop off the exact level, where many orders can cluster. A far level means a wide stop and a smaller position.

Average True Range is a volatility measure introduced by J. Welles Wilder Jr. in his 1978 book New Concepts in Technical Trading Systems. It averages the true range: the largest of today’s high minus low, today’s high minus yesterday’s close, and yesterday’s close minus today’s low. Most charting platforms show it; enter the value in price units.

No method makes a stop “right”. A tight stop is hit more often by normal noise; a wide stop loses more each time. Sizing from risk keeps the money at stake the same whichever width you choose: a wider stop simply buys fewer shares.

Stop, stop-limit and trailing stop orders

A stop loss in a plan becomes real only when you place an order. US regulators describe three types:

OrderWhat happens at the stop priceMain risk
Stop (stop-loss)Becomes a market orderFills at the next available price, which can be well past the stop
Stop-limitBecomes a limit order at your limit price or betterMay not fill at all if the price moves past the limit
Trailing stopThe stop price follows the market by a set percent or amount and stays fixed when the price moves against youSame fill risk as a stop or stop-limit; short swings can trigger it

The SEC’s investor bulletin says: “A stop order, also referred to as a stop-loss order, is an order to buy or sell a stock once the price of the stock reaches a specified price, known as the stop price. When the stop price is reached, a stop order becomes a market order.” It adds that “The stop price is not the guaranteed execution price for a stop order”, and that a stop-limit order “may not be executed if the stock’s price moves away from the specified limit price.”

On trailing stops, the same bulletin says the stop price is “either a defined percentage or dollar amount, above or below the current market price”. When the price moves in your favor it “trails” the market; “if the security’s price moves in an unfavorable direction the trailing stop price remains fixed”. Its example: buy XYZ at $20, place a sell trailing stop $1 below the market when XYZ is at $22, XYZ peaks at $24, and the stop stays at $23. “Shares are sold when XYZ reaches $23, though the execution price may deviate from $23.”

Step (Investor.gov example)XYZ priceTrailing stop ($1 trail)
Order placed22.0021.00
Price rises23.0022.00
Peak24.0023.00
Price falls23.5023.00 (stays)
Stop reached23.00triggers; fill may differ

Brokers do not all offer every type, and they may trigger stops on last-sale prices or on quotes. The bulletin tells investors to check their own firm’s rules.

Gap risk: why the loss can be bigger than planned

Every loss figure in the calculator assumes the order fills exactly at the stop. A stop order does not promise that. FINRA’s investor guide says: “A stop order becomes a market order once the stop price is reached. The price you receive upon execution, though, could be markedly different than your stop price.” With a $50 sell stop, “If the market’s moving fast, you could receive less—and potentially significantly less—than $50 per share by the time your order is executed.”

FINRA’s guidance to firms (Regulatory Notice 16-19) adds that “Stop orders may be triggered by a short-lived, dramatic price change” and that a sell stop triggered “during a precipitous price decline … is more likely to result in an execution well below the stop price.” The same happens when a price opens beyond the stop after news: the first available price can be far past it.

Hypothetical: long 99 shares at 50.00, stop 47.50, commission 1.00 per orderFill at the stopGap fill at 45.00
Loss per share2.505.00
Loss on price (× 99)247.50495.00
Commissions2.002.00
Total loss249.50497.00
In R (planned loss = 1R)1.00R1.99R

A stop-limit order avoids a fill below the limit, but then the position can stay open while the price keeps falling. Neither order type removes the risk; it moves it.

Targets in R and the break-even win rate

Without fees, a target at R times the stop distance needs a win rate of 1 ÷ (1 + R) to break even. Fees raise that rate, because they cut each win and add to each loss. The fee column uses the default example: 99 shares, entry 50.00, stop 47.50, commission 1.00 per order.

TargetBreak-even win rate, no feesWith 2.00 round-trip commission (example)
0.5R66.67%67.21%
1R50.00%50.40%
1.5R40.00%40.32%
2R33.33%33.60%
3R25.00%25.20%
4R20.00%20.16%

A break-even win rate is arithmetic, not a forecast. It says nothing about how often a given target is reached. Farther targets need fewer wins to break even but are reached less often.

Worked examples

All trades below are hypothetical, with fictional prices and accounts chosen for the arithmetic.

1. Long stock, 5% stop, 1% risk, 1.00 commission (the default)

StepArithmeticResult
Stop price50.00 × (1 − 0.05)47.50
Stop distance (1R)50.00 − 47.502.50
Risk budget25,000 × 1%250.00
Size(250.00 − 2 × 1.00) ÷ 2.50 = 99.2, rounded down99 shares
Total loss at the stop2.50 × 99 + 2.00249.50
2R target50.00 + 2 × 2.5055.00
Net profit at 2R5.00 × 99 − 2.00493.00
Break-even win rate at 2R249.50 ÷ (493.00 + 249.50)33.60%
Gap fill at 45.005.00 × 99 + 2.00497.00 (1.99R)

2. Short with an ATR stop and a percent fee

Hypothetical short at 120.00, ATR 3.40, stop at 1.5 × ATR, account 40,000, risk 0.5%, fee 0.05% per side, whole shares.

StepArithmeticResult
Stop price120.00 + 1.5 × 3.40125.10
Stop distance (1R)125.10 − 120.005.10 (4.25%)
Risk budget40,000 × 0.5%200.00
Cost per share at the stop5.10 + 0.0005 × (120.00 + 125.10)5.22255
Size200.00 ÷ 5.22255 = 38.30, rounded down38 shares
Total loss at the stop5.10 × 38 + 4.6569198.46
2R target (below entry)120.00 − 2 × 5.10109.80
Break-even win rate at 2R198.46 ÷ (383.23 + 198.46)34.12%

3. Coin bought above support, size in steps of 0.001

Hypothetical long at 2,000.00 with support at 1,900.00 and a 10.00 buffer, account 10,000, risk 2%, exchange fee 0.1% per side.

StepArithmeticResult
Stop price1,900.00 − 10.001,890.00
Stop distance (1R)2,000.00 − 1,890.00110.00 (5.50%)
Cost per unit at the stop110.00 + 0.001 × (2,000.00 + 1,890.00)113.89
Size200.00 ÷ 113.89 = 1.75608, rounded down to 0.0011.756 units
Position value1.756 × 2,000.003,512.00
Total loss at the stop110.00 × 1.756 + 6.83 fees199.99
1R target2,000.00 + 110.002,110.00
Break-even win rate at 1R199.99 ÷ (185.94 + 199.99); above 50% because of fees51.82%

Limits of these numbers

FAQ

How do you calculate a stop loss?

For a long trade, stop price = entry × (1 − stop %); for a short trade, entry × (1 + stop %). With ATR, the stop is entry minus (long) or plus (short) a multiple of ATR. The loss if it fills is the distance to the stop × position size + fees. Example: a long at 50.00 with a 5% stop has its stop at 47.50; with 99 shares and 2.00 in commissions the loss is 249.50.

How do I calculate stop loss and take profit?

Set the stop first; its distance from entry is 1R. A take-profit at k R sits k × that distance from the entry: above it for a long, below it for a short. A long at 50.00 with a 47.50 stop (1R = 2.50) has targets at 52.50 (1R), 55.00 (2R) and 57.50 (3R). Before fees, a 2R target needs a 33.33% win rate to break even.

What is a good stop loss percentage?

There is no single correct percentage. A stop that fits one market can be inside normal daily moves in another, which is why some traders scale the stop to volatility with ATR. What you can control is the money at risk: size the position so that distance × size + fees stays within the share of the account you accept to lose on one trade.

What is the difference between a stop-loss and a stop-limit order?

A stop-loss (stop) order becomes a market order when the stop price is reached, so it usually fills but the price is not guaranteed. A stop-limit order becomes a limit order, so it fills only at the limit price or better and may not fill at all if the price moves past the limit. The SEC’s Investor.gov bulletin and FINRA both describe this trade-off.

Can a stop-loss order fill below the stop price?

Yes. FINRA says the price you receive “could be markedly different than your stop price”, and a sell stop triggered in a sharp fall “is more likely to result in an execution well below the stop price.” A price that opens beyond the stop after news fills at the first available price. A long stopped at 47.50 that fills at 45.00 loses twice the planned 2.50 per share.

How do you set a stop loss with ATR?

Read the Average True Range from your chart, choose a multiple, and place the stop that many ATRs from the entry: entry − m × ATR for a long, entry + m × ATR for a short. With ATR 3.40 and a 1.5 multiple, a short at 120.00 has its stop at 125.10. The ATR value depends on the period you use and changes every day.

Related tools and templates

Sources

  1. US Securities and Exchange Commission, Office of Investor Education and Assistance, “Stop, Stop-Limit, and Trailing Stop Orders – Investor Bulletin”, Investor.gov, 13 July 2017, updated 18 August 2026.
  2. US Securities and Exchange Commission, “Understanding Order Types – Investor Bulletin”, Investor.gov, 12 July 2017, updated 18 August 2026.
  3. FINRA, “Stop Orders: Factors to Consider During Volatile Markets”, investor insights, 26 March 2025.
  4. FINRA, Regulatory Notice 16-19, “FINRA Issues Guidance Regarding the Use of Stop Orders During Volatile Market Conditions”, 26 May 2016.
  5. J. Welles Wilder Jr., New Concepts in Technical Trading Systems, Trend Research, 1978 (Average True Range).

Web sources retrieved 10 Nov 2026.

Educational tool only, not financial or investment advice. Results come from the numbers you enter and the formulas above; they are not forecasts and do not suggest where to place a stop. A stop order does not guarantee the fill price, and a stop-limit order may not fill. Trading can lose money quickly, including more than the planned risk. All example numbers are fictional.