Pivot Point Calculator
A pivot point is the average of the prior period’s high, low and close: P = (H + L + C) ÷ 3. Enter last day’s, week’s or month’s prices to get classic, Woodie, Camarilla, Fibonacci and DeMark support and resistance levels, with the nearest level to the current price.
Prior period prices Example values The prices below are hypothetical. Replace them with the open, high, low and close of the last completed period on your chart. Use a dot for decimals.
- Resistance (R)
- Pivot (P)
- Support (S)
- Current price
Everything runs in your browser. Nothing is saved or sent.
How the pivot point calculator works
- Prior period. All five methods use the last completed period: H = high, L = low, C = close, and for DeMark also O = open. Range R = H − L.
- Pivot. Classic, Camarilla and Fibonacci use P = (H + L + C) ÷ 3. Woodie gives the close double weight. DeMark builds its own pivot from X.
- Levels. Each method adds to or subtracts from its anchor: the pivot (classic, Woodie, Fibonacci, DeMark) or the close (Camarilla).
- Nearest level. With a current price, each table marks the level with the smallest absolute distance. Distance = level − current price, both rounded to the decimals shown, so the columns add up; % = (level − current price) ÷ current price, from unrounded values.
The classic, Fibonacci and DeMark formulas match StockCharts ChartSchool’s Pivot Points article. Classic R3 to S4, Woodie and Camarilla follow the TradingView Help Center’s Pivot Points Standard reference, where classic R3/R4 are its “Traditional” type written in a shorter form: TradingView’s R3 = P × 2 + (H − 2 × L) is the same number as H + 2(P − L).
Where the sources disagree, and what this tool uses
Pivot points have no single official definition. Charting platforms and calculator sites use different versions of some levels. These are the differences found in the sources checked on 2 Nov 2026:
| Item | Variants found | This tool |
|---|---|---|
| Classic R3/S3 | H + 2(P − L) / L − 2(H − P) (TradingView “Traditional”, Omni Calculator, BabyPips); P ± 2R (TradingView “Classic”). StockCharts shows only R1/R2 and S1/S2. | H + 2(P − L), L − 2(H − P) |
| Classic R4/S4 | H + 3(P − L) / L − 3(H − P) (TradingView “Traditional”, written as P × 3 + (H − 3L)); P ± 3R (TradingView “Classic”); most calculators stop at R3. | H + 3(P − L), L − 3(H − P), labelled as an extra level |
| Woodie pivot | (H + L + 2 × prior close) ÷ 4 (Omni Calculator, BabyPips); (H + L + 2 × current open) ÷ 4 (TradingView). | Prior close (the version most calculators use) |
| Woodie R3/R4 | Only TradingView lists them. | Not shown; R1/R2 and S1/S2 only |
| Camarilla R5/S5 | Only TradingView: R5 = (H ÷ L) × C, S5 = C − (R5 − C). | Shown, labelled as TradingView’s definition |
| DeMark pivot | P = X ÷ 4 (StockCharts, TradingView); some calculators show only R1/S1. | P = X ÷ 4, R1, S1 |
If a level on your platform does not match, check which variant it uses and whether its “close” is the last trade or a settlement price. TradingView’s reference notes that for futures “the daily close usually represents the settlement price”, and that intraday and daily data sets can contain different trades, which changes the inputs and therefore every level.
Daily, weekly or monthly pivots
The period selector only changes the labels and the notes; the formulas are the same for every period. StockCharts ChartSchool describes the usual pairing of chart and pivot period:
| Chart you trade on | Pivot uses the prior… | Levels change |
|---|---|---|
| 1-, 5-, 10- and 15-minute | day’s high, low and close | Every day |
| 30-, 60- and 120-minute | week’s high, low and close (calendar weeks) | Every week |
| Daily | month’s high, low and close | Every month |
| Weekly and monthly | year’s high, low and close | Every year |
TradingView’s “Auto” setting is similar: daily pivots for charts up to 15 minutes, weekly pivots for charts above 15 minutes and below 1 day, and monthly pivots for daily charts and above. Markets that trade around the clock, such as forex and crypto, have no single official close, so the daily high, low and close depend on the session end your data provider uses.
Worked examples (hypothetical prices)
All prices below are made up to show the arithmetic. They are not quotes or forecasts.
1. Stock, prior day (2 decimals)
Prior day: open 101.20, high 104.50, low 99.80, close 103.10. Range = 4.70. P = (104.50 + 99.80 + 103.10) ÷ 3 = 307.40 ÷ 3 = 102.4667, shown as 102.47.
| Level | Classic | Woodie | Camarilla | Fibonacci | DeMark |
|---|---|---|---|---|---|
| R5 | – | – | 107.96 | – | – |
| R4 | 112.50 | – | 105.69 | – | – |
| R3 | 109.83 | – | 104.39 | 107.17 | – |
| R2 | 107.17 | 107.33 | 103.96 | 105.37 | – |
| R1 | 105.13 | 105.45 | 103.53 | 104.26 | 106.15 |
| P | 102.47 | 102.63 | 102.47 | 102.47 | 102.98 |
| S1 | 100.43 | 100.75 | 102.67 | 100.67 | 101.45 |
| S2 | 97.77 | 97.93 | 102.24 | 99.56 | – |
| S3 | 95.73 | – | 101.81 | 97.77 | – |
| S4 | 93.70 | – | 100.52 | – | – |
| S5 | – | – | 98.24 | – | – |
Classic R1 = 2 × 102.4667 − 99.80 = 105.13. Woodie P = (104.50 + 99.80 + 2 × 103.10) ÷ 4 = 102.63. Camarilla R3 = 103.10 + 1.1 × 4.70 ÷ 4 = 104.39. The close (103.10) is above the open (101.20), so DeMark X = 2 × 104.50 + 99.80 + 103.10 = 411.90, P = 102.98, R1 = 205.95 − 99.80 = 106.15.
Notice that Camarilla S1 (102.67) sits above the classic pivot (102.47). Camarilla levels are centred on the close, not on P, so with a close near the high its support levels can lie above the classic pivot. With a current price of 104.00, the nearest classic level is R1 at 105.13, +1.13 (+1.09%) away.
2. EUR/USD-style quote, prior week (5 decimals)
Prior week: open 1.08420, high 1.09160, low 1.07650, close 1.07900. Range = 0.01510. P = 3.24710 ÷ 3 = 1.08237. R1 = 1.08823, S1 = 1.07313, R2 = 1.09747, S2 = 1.06727. Fibonacci R1 = 1.08237 + 0.382 × 0.01510 = 1.08813. The close is below the open, so DeMark X = 1.09160 + 2 × 1.07650 + 1.07900 = 4.32360, P = 1.08090, R1 = 1.08530, S1 = 1.07020.
3. DeMark: the three open-close cases
Same high 52, low 48 and open 50; only the close changes.
| Close | Case | X | P = X ÷ 4 | R1 = X ÷ 2 − L | S1 = X ÷ 2 − H |
|---|---|---|---|---|---|
| 51 | Close > open: 2H + L + C | 203 | 50.75 | 53.50 | 49.50 |
| 50 | Close = open: H + L + 2C | 200 | 50.00 | 52.00 | 48.00 |
| 49 | Close < open: H + 2L + C | 197 | 49.25 | 50.50 | 46.50 |
In the middle row the close also sits exactly mid-range, so P is 50.00 and R1/S1 land on the prior high and low. An up close counts the high twice in X and lifts all three levels; a down close counts the low twice and lowers them.
4. Low-priced crypto token (8 decimals)
With a high of 0.00001875, a low of 0.00001234 and a close of 0.00001500, P = 0.00001536 (0.0000153633 rounded). At 2 decimals every level would show as 0.00, so Auto keeps at least four significant digits for prices below 1, up to 8 decimals.
Pivot methods compared
| Method | Anchor | Levels here | Spacing | Needs open? |
|---|---|---|---|---|
| Classic (floor) | P = (H + L + C) ÷ 3 | R1–R4, S1–S4 | Wide; R2/S2 are one full range from P | No |
| Woodie | (H + L + 2C) ÷ 4 | R1–R2, S1–S2 | As classic, shifted toward the close | No |
| Camarilla | The close | R1–R5, S1–S5 | Tight; R1 is 1.1R ÷ 12 above the close | No |
| Fibonacci | P = (H + L + C) ÷ 3 | R1–R3, S1–S3 | 38.2%, 61.8% and 100% of the range | No |
| DeMark | X ÷ 4 | R1, S1 | One level each side | Yes |
StockCharts ChartSchool notes that pivot points “were originally used by floor traders to set key levels”, and that its DeMark version has “only one resistance (R1) and one support (S1)”. The Fibonacci ratios are the same 38.2% and 61.8% used for retracements; the Fibonacci calculator explains where they come from.
Honest limits: what pivot points can and cannot do
- Reference levels, not forecasts. A pivot is an average of last period’s prices. It describes where the market traded, not where it will go. No study cited here shows that these levels predict turns.
- Confirmation matters. StockCharts ChartSchool writes: “As with all indicators, confirming Pivot Point signals with other aspects of technical analysis is important.”
- Inputs decide everything. Session times, settlement versus last trade, and extended-hours data change the high, low and close, and so every level. Two platforms can show different pivots for the same day.
- Many levels, many “hits”. With five methods and up to eleven levels each, price will usually be near some level. A touch seen after the fact is not evidence that the level caused the turn.
- Gaps and news. A large overnight gap or a news event can move price past several levels at once. The levels do not adjust until the next period.
Using the levels in a trade plan
A level is a price to plan around, not a signal. If you use one, decide in advance where you would be wrong and how much you could lose. With example 1, a buy near classic S1 (100.43), a stop below S2 (97.77) and the pivot (102.47) as a target give a risk of 2.66 and a potential reward of 2.04, a reward-to-risk ratio of 0.77 to 1. Price may reach neither. The risk-reward calculator checks that ratio, and the position size calculator turns the stop distance into a position size that caps the loss.
FAQ
How do you calculate a pivot point?
Take the prior period's high, low and close and average them: P = (high + low + close) ÷ 3. The first resistance is R1 = 2 × P − low and the first support is S1 = 2 × P − high. The second levels add or subtract the full range: R2 = P + (high − low), S2 = P − (high − low). Example with a hypothetical prior day of high 104.50, low 99.80 and close 103.10: P = 307.40 ÷ 3 = 102.47, R1 = 105.13, S1 = 100.43.
Which pivot point method is the best?
None has been shown to be best. The methods answer different questions. Classic and Fibonacci pivots spread levels around the average of high, low and close. Woodie gives the close more weight. Camarilla clusters levels tightly around the close. DeMark uses the open-close relationship and gives only one support and one resistance. Pick one method, use it consistently and test it on past data before relying on it.
Should I use daily, weekly or monthly pivot points?
Match the period to how long you hold a trade. StockCharts ChartSchool describes the common convention: 1- to 15-minute charts use the prior day's high, low and close; 30- to 120-minute charts use the prior week's; daily charts use the prior month's. Daily pivots change every day, weekly pivots once a week and monthly pivots once a month.
What is the difference between Camarilla and classic pivot points?
Classic levels are built around the pivot P = (high + low + close) ÷ 3 and step out by whole multiples of the range. Camarilla levels are built around the prior close and step out by 1.1 × range divided by 12, 6, 4 and 2, so R1 to R3 and S1 to S3 sit much closer to the close. On a 4-point range, classic R1 to S1 spans 4 points while Camarilla R1 to S1 spans about 0.73 points.
Why do DeMark pivot points need the open?
DeMark pivots start from a number X that depends on whether the prior period closed above, below or at its open. If close is below open, X = high + 2 × low + close. If close is above open, X = 2 × high + low + close. If they are equal, X = high + low + 2 × close. Then P = X ÷ 4, R1 = X ÷ 2 − low and S1 = X ÷ 2 − high.
Do pivot points actually work?
There is no proof that pivot points predict where price will turn. They are arithmetic on last period's prices, so they show where the market traded, not where it will go. StockCharts ChartSchool says confirming pivot point signals with other technical analysis is important. Treat them as reference levels to plan around, and test any rule on past data first.
Related tools and templates
- Fibonacci calculator
Retracement and extension levels from a swing high and low. - Risk-reward calculator
Reward-to-risk ratio from entry, stop and target. - Position size calculator
Size a trade from account risk and stop distance. - Lot size calculator
Forex lots from risk and stop in pips. - Day trading journal
Log intraday trades and the levels you used. - Backtesting spreadsheet
Test a pivot-based rule on past data before using it.
Educational tool only, not financial or investment advice. Pivot points are calculated from past prices and do not predict where prices will go. All example prices on this page are hypothetical. Trading involves risk of loss. Sources: StockCharts ChartSchool, Pivot Points, TradingView Help Center, Pivot Points Standard. Retrieved 2 Nov 2026.